Maximum number of zones.
Moderators: Moderator, DM
-
Maximvs
- Posts: 281
- Joined: Sun May 17, 2009 3:45 pm
Maximum number of zones.
Someone mentioned that in another thread. BG is getting close to it's maximum number of zones? What is the maximum number, 255 ?
MmmmMMMMmmm, tasty humanz, hmmmmMMM!!!
-
Maecius
- Retired Admin
- Posts: 11639
- Joined: Sat May 16, 2009 4:24 pm
Re: Maximum number of zones.
As I understand it there's not really a hard number.
But after a certain size, due to the way NWN2 works, the module's stability will begin to seriously suffer and we'll start to get a lot of crashes and bugs.
Someone with more Toolset savvy than I can probably correct me if and where I'm wrong.
But after a certain size, due to the way NWN2 works, the module's stability will begin to seriously suffer and we'll start to get a lot of crashes and bugs.
Someone with more Toolset savvy than I can probably correct me if and where I'm wrong.
r e s o u r c e s :
- BG:TSCC Wiki
- Community News
- Server Rules and Information
- Supporting BG:TSCC-
Maximvs
- Posts: 281
- Joined: Sun May 17, 2009 3:45 pm
Re: Maximum number of zones.
Sounds more server savvy than toolset savvy. Does that mean the size of each maps also counts?
MmmmMMMMmmm, tasty humanz, hmmmmMMM!!!
-
Blackman D
- Retired Staff
- Posts: 4818
- Joined: Sat Sep 12, 2009 5:43 am
- Location: IL
Re: Maximum number of zones.
map size doesnt matter no, its the crap thats on the map, a large map can pull very little resources and a small map can hog a lot, it just depends on how its setup
mostly placeables vs environmental objects; placeables have actual properties and the server has to load each one which takes up more resources while environmental objects have bare minimum and take up next to nothing, but can also do nothing either
mostly placeables vs environmental objects; placeables have actual properties and the server has to load each one which takes up more resources while environmental objects have bare minimum and take up next to nothing, but can also do nothing either
everyone is evil till proven otherwise
-
Maximvs
- Posts: 281
- Joined: Sun May 17, 2009 3:45 pm
-
Aspect of Sorrow
- Custom Content
- Posts: 2702
- Joined: Fri Mar 28, 2014 7:11 pm
- Location: Reliquary
Re: Maximum number of zones.
For what it's worth, the actual hard limit is exactly 2,147,483,646.
-
Silver_Lining
- Posts: 649
- Joined: Tue Jan 22, 2013 7:58 pm
Re: Maximum number of zones.
If there are guild halls and areas that were made with too many placables, I would be happy to do placable to environmental conversions if sent the areas by the DEV team, to lower the use of resources on the server. The only things that 'should' be placable are charis/benches/walkables/examanable items etc. If everything else is converted to environemtnal with walkmesh cutters, that too can help cut down on space used.
Retired Player
-
Tsidkenu
Re: Maximum number of zones.
Old Harper guildhall has way too many placeables. Start there pls. 
-
Karond
- Posts: 2221
- Joined: Sat Jan 15, 2011 10:47 am
- Location: Sweden
Re: Maximum number of zones.
Too many placeables in rasta's and mrm3ntalist's character inventories. That's 2% of the lag alreadyTsidkenu wrote:Old Harper guildhall has way too many placeables. Start there pls.
-
Aspect of Sorrow
- Custom Content
- Posts: 2702
- Joined: Fri Mar 28, 2014 7:11 pm
- Location: Reliquary
Re: Maximum number of zones.
Please consider the following image.

1. No-walk terrain painting is preferrable to walkmesh cutting. Baking process is shortened with significant sums of cutters, in addition the polys are more uniform when calculating intersecting walkmesh and pathfinding cut trajectory.
2. Objects taking up less than a single human phenotype's space is better off not requiring walkmesh cuts, nor no-walks as it would lessen at minimum 2 additional calculated pathfinding points, which adds to overall server calculated travel. Something that should be considered especially between PC and NPC alike and is performed by the server, not the client.
The green represents octogonal boundaries within the area boundary determined by walkmesh and the red represents the slicing formality incurred. The more points on non-uniformed polygonal draws increases additional pathfinding calculation along the traversed path to the next node. In this example, blue's pathfinding from O to X has a calculated 3 points of travel. If the octogon were a Triangle, only two would be required. The length of the shape also is taken into consideration for the timing involved. This calculation is not only determined by the baked process but dynamic as well (npcs, pcs), which adds to the ordeal. Fourty players moving actively across the planes is trivial in comparison to the amount of NPCs whose pathfinding is determined the same way, it adds up. If multiple objects are encountered which requires pathing to adjust repeatedly, say, a group of colliding barrels, you'll see upwards of 10+ nodes to be calculated. In some places it can become extreme, such as the Batari cavern tileset. If left to C2 boundary / collision data, models can consume significant amounts of nodes just by the simple curvature of one corner.
40 players performing approximately 20 move actions approximately every ~5 seconds.
At minimum 100 NPCs at any given point in time performing 1 move action at a similar approximation, 24 pathfinding requests alone across potentially cumbersome walkmesh/terrains adds up, even before taking into consideration any scripts firing, or combat.
We as players take the simple matter of clicking in a digital space for granted on a very optimization-lacking engine.
nwserver is a single threaded process.

1. No-walk terrain painting is preferrable to walkmesh cutting. Baking process is shortened with significant sums of cutters, in addition the polys are more uniform when calculating intersecting walkmesh and pathfinding cut trajectory.
2. Objects taking up less than a single human phenotype's space is better off not requiring walkmesh cuts, nor no-walks as it would lessen at minimum 2 additional calculated pathfinding points, which adds to overall server calculated travel. Something that should be considered especially between PC and NPC alike and is performed by the server, not the client.
The green represents octogonal boundaries within the area boundary determined by walkmesh and the red represents the slicing formality incurred. The more points on non-uniformed polygonal draws increases additional pathfinding calculation along the traversed path to the next node. In this example, blue's pathfinding from O to X has a calculated 3 points of travel. If the octogon were a Triangle, only two would be required. The length of the shape also is taken into consideration for the timing involved. This calculation is not only determined by the baked process but dynamic as well (npcs, pcs), which adds to the ordeal. Fourty players moving actively across the planes is trivial in comparison to the amount of NPCs whose pathfinding is determined the same way, it adds up. If multiple objects are encountered which requires pathing to adjust repeatedly, say, a group of colliding barrels, you'll see upwards of 10+ nodes to be calculated. In some places it can become extreme, such as the Batari cavern tileset. If left to C2 boundary / collision data, models can consume significant amounts of nodes just by the simple curvature of one corner.
40 players performing approximately 20 move actions approximately every ~5 seconds.
At minimum 100 NPCs at any given point in time performing 1 move action at a similar approximation, 24 pathfinding requests alone across potentially cumbersome walkmesh/terrains adds up, even before taking into consideration any scripts firing, or combat.
We as players take the simple matter of clicking in a digital space for granted on a very optimization-lacking engine.
nwserver is a single threaded process.
-
chad878262
- Posts: 9332
- Joined: Thu Sep 18, 2014 6:55 pm
Re: Maximum number of zones.
very informative post AoS. Interesting stuff!
Chord Silverstrings - Bard and OSR Squire / Tarent Nefzen - Arcane Wand Merchant and Master Alchemist / Irrace Arkentlar - Drow Adventurer / Finneaus Du'Veil - Gem Merchant and Executive Officer of SCCE
Tarent's Wands and Elixirs
A Wand Crafter's guide to using wands
Tarent's Wands and Elixirs
A Wand Crafter's guide to using wands
-
Storm Munin
- Posts: 1355
- Joined: Sun Nov 07, 2010 5:03 am
- Location: Sweden, Alfheimar expat
Re: Maximum number of zones.
I should cut down on the numbers in my server vault.
"Drojal zhah obdoluth dorb'd streeak, Lueth dro zhah zhaunau dorb'd ogglin."
"Existence is empty without chaos, Life is boring without enemies." So sayeth Lady Lolth, Queen of Chaos.
PC: Natalya, wandering enchantress.
"Existence is empty without chaos, Life is boring without enemies." So sayeth Lady Lolth, Queen of Chaos.
PC: Natalya, wandering enchantress.
-
DM Pun Pun
- Posts: 1424
- Joined: Tue Nov 11, 2014 4:52 pm
Re: Maximum number of zones.
There is no limit to how many areas you can have in a module. However, every area makes the module size bigger, and when you hit a certain size, performance will suffer.
-
LISA100595
- Retired Staff
- Posts: 5203
- Joined: Mon Aug 22, 2011 12:23 pm
Re: Maximum number of zones.
Also Exterior Areas take up a Ton of more resources than Interiors. Thanks for the technical infor AOS. 
Lady Elvina Aira-S'efarro - The Order of the Silver Rose
Nai'KaBael Oakenshadow - EDE former ArchDruidess and Wife and Mate of Mendel
Salaria - Bounty Hunter half-sister of Darius Brothers
Angelina Northstar - Holy Warrior of Tyr / Knight of the Silver Rose
Nai'KaBael Oakenshadow - EDE former ArchDruidess and Wife and Mate of Mendel
Salaria - Bounty Hunter half-sister of Darius Brothers
Angelina Northstar - Holy Warrior of Tyr / Knight of the Silver Rose
-
Maximvs
- Posts: 281
- Joined: Sun May 17, 2009 3:45 pm
Re: Maximum number of zones.
Very interesting information... While we're at it, what's the least taxing on a server host, between a placeable converted as environmental and a special effect that looks exactly the same?
MmmmMMMMmmm, tasty humanz, hmmmmMMM!!!